ARP Connecting Rod Bolt Set - Triumph GT6, TR250 & TR6

$99.95

These are the best fasteners you can purchase for the original style Triumph connecting rods.  Produced by ARP in their ARP2000 material, the bolts have an ultimate tensile strength of 210,000psi.  All fast road and racing motors utilizing the original style connecting rods should be using this ARP bolt set.

$99.95

Clutch Kit, Stage III (335 lb ft) - Triumph TR250 & TR6

$474.95

Our highest capacity 8.5" street clutch package for the Triumph TR250 and TR6.  This clutch is rated to hold in excess of 335 lb ft of torque.  With a 10% safety margin this clutch is suitable for engines producing upto 301ft lbs of torque.

$474.95

Black Hose Kits

$44.95

High quality plain black radiator and heater hose kits for your Triumph TR250 and TR6.
Available with or without OE style "SuperGrip" hose clamps and be sure to select the correct hose set for your car.

$44.95

Crankshaft Damper, Remanufactured - Triumph TR250 & TR6

$169.95

While you may be able to have your crankshaft damper rebuilt more inexpensively elsewhere, we guarantee our dampers to have 100% accurate timing mark alignment and the rubber bond is guaranteed for life.  You won't find a better rebuilt damper from any other British car parts vendor.

$169.95

OE Connecting Rod, Remanufactured - Triumph Spitfire 1500, GT6, TR250 & TR6

$69.95

Original connecting rod for Triumph Spitfire 1500, GT6, TR250 & TR6.  Also fits MG Midget 1500.

Our remanufactured rods are degreased, magnafluxed, blasted, big end resized, and the small end bush replaced and honed to size.

$69.95

Clutch Hose, Stainless Steel - Triumph TR250 & TR6

$29.95

A very high quality braided stainless steel clutch hose for your Triumph TR250 and TR6. 
In addition to the stainless braid giving the hose greater longevity, clutch feel is improved as the braid does not allow the rubber hose to expand under pressure.

$29.95

Clutch Hose, Aftermarket - Triumph TR250 & TR6

$13.95

Aftermarket clutch hose, color may vary but is typically an opaque white.  Fits Triumph TR250 & TR6.

$13.95

Clutch Hose, Original Red - Triumph TR250 & TR6

$16.95

Original style red colored flexible clutch hose for Triumph TR250 and TR6.

$16.95

Water Pump Housing, Aluminum - Triumph GT6, TR250 & TR6

$199.95

March 2017The low quality pump housings produced by Limora/SCP are now being sold by another company in the USA.  After ordering a few examples, 50% of ther received units still had significant defects.  Porosity in the casting (allowing leaks), lacking fully formed female threads for fasteners, improperly machined gasket surfaces, etc.  We will continue to not offer this product due to low quality; these current aluminum water pump housings are some of the worst parts available for British cars.

$199.95

Clutch Kit, Stage I (230lb ft) - Triumph TR250 & TR6

$424.95

This is our Stage I clutch package for uprated Triumph TR250s and TR6s.  We utilize a Sachs clutch cover in this kit.  We then have a custom friction disc produced with a stronger and more stiffly sprung center hub, the friction material is Kevlar and has a greater coefficient of friction to handle the increased torque load.  The Kevlar friction material also has increased durability in terms of its abilit

$424.95
Syndicate content